[FSX] Aerosoft Airbus X [Full installer with crack and serial]

hello everyone, This torrent contains airbus x v1.11(full installer) with cracked ascrypt_pro.dll. Also,SERIAL number and subscribed email is supplied with the torrent. This is the first aerosoft airbus x on TPB with working FMC and is a fully functional model. The Aerosoft Airbus X is a high definition rendering of this venerable aircraft for FSX. Created with help from many Airbus pilots and Air Berlin it is what Aerosoft believes an airliner in FSX should be. Directly aimed at the user who likes to fly and not to spend too much time on configuration and pre-flight checks but who does not want to compromise on the modelling and features, this aircraft will appeal to a large group of flight simmers.The fully functional Virtual Cockpit puts the user in a fully immersive environment where detailed animations (all with sound effects) and a high level of detailed modelling show the level of details that separate FSX from FS2004. All the displays are detailed and easy to read, even at lower resolutions and show how most A320/A321?s are now leaving the factory. While leaving out the most complex (and least used) functions of the computer systems, the actual operation of the aircraft is highly accurate and as easy and logical as Airbus designs its aircraft. The displays will automatically show you the information you most need at any given moment. The Fly-By-Wire flight model is totally reliable and extremely close to the actual aircraft. Where older aircraft use conventional throttles, the Airbus has a realistic FADEC system that means you almost never have to touch the throttle after you started your take-off run. The external model is highly detailed and very smooth. All cabin and freight doors can be operated and show the interior of the aircraft. Animation of the flight control surfaces is accurate both in timing and movements. Please note that the files of this product will be personalized when they are installed. This personalization allows us to find out who paid for this product, should any of these files ends up in places where they should not be. This personalization has NO impact on performance and does NOT include any Digital Right Management. It will NOT prevent you from installing the product as many times as you wish, nor will it prevent you from installing on all of the machines you own. Features: Manuals/Documentation: Normal Checklist, PF/PNF Procedure guide, Systems Manual, Normal Procedures Manual. Over 120 pages (available in formats for smart phones and iPad), available in English, French, Spanish, German, Dutch and Russian. Coming: soon => Virtual Airlines: There will be a reduced price option for VA pilots of VA?s that have a contract with Aerosoft (contact [email protected] /* */ for that). Extensive animations: sunshades, standby compass, APU door, pullout tables, observer seat, windows, windshield wipers (individual on both sides, two speed), passenger and cargo doors, landing lights, wind milling engines (depending on wind direction and strength), Ground Power Unit (will power the aircraft), traffic cones, chocks (will act as parking brakes), Custom coded Spoiler/speed brake animation. All animations come with sound effects. Of course all the standard things like gears and flight control surfaces are animated. Load/Save aircraft state module: easy to use module that saves all aircraft settings, includes presets for cold & dark, taxi, takeoff, cruise. Compatibility: comes prepared for AES, uses default FSX standards wherever possible to stay compatible with other add-ons and hardware. Note: throttle is read from DirectX, bypasses FSX completely, to avoid FSX related problems. Models / Engines / Liveries: A320 with IAE and CFM engine, A321 with IAE and CFM engine, (systems based on IAE standards). Iberia, Niki, BA, US Airways, Air Berlin, Air France, Alitalia and Lufthansa included, dozens of other paints available shortly after release. Sounds: High definition (FSX standard) sound set, with additionally over 100 sounds for VC. Installation: Easy installer and no complex DRM schemes or Online installers. Lighting: Advanced non standard lighting system (landing lights, taxi way turn off lights, nose wheel taxi light, nose wheel take-off light) that actually light up the scenery around the aircraft. Frame rates: Frame rates are comparable to default FSX airbus (that has 1/5th the polygons and almost no detailed systems). Paint kit: Available on release, highly advanced. Extensibility: Very open in design (all systems in XML etc) and Aerosoft invites people to change and extend this product. Airbus X Connect: Stand alone application Load manager: Makes it easy to load passengers, cargo and fuel TakeOff datasheet: Calculates Vspeed and FLEX settings Flight Following: Use any device with a browser (like Smartphone, iPod etc) so you can go on with your life as the Airbus cruises. Systems: Air conditioning: full automatic and manual modes, including 3 separate zones, zone controller, pack controller, pack flow controller, hot air pressure regulator, engine bleed controller, APU bleed controller. Full feedback on ECAM COND and BLEED pages. Pressurization: full automatic using 6 control modes with cabin pressure controllers, outflow valve actuator, control panel and safety valves. All indications on PRESS and DOORS ECAM. Avionics Ventilation: full automated mode using the Avionics Equipment Ventilation Controller (AEVC) with valve indication on ECAM. Landing Gear/Brakes: Full manual control, auto brakes, anti-skid, brake fans. Full indications on the main panel, ECAM WHEEL page, ACCU pressure gauge. Standby instruments: compass (drops from overhead panel), horizon, DDRMI and clock/timer. Seatbelt/ No Smoking: full automated and semi automated modes, including 10.000 feet auto switch. ECAM: all pages (ENG, BLEED, PRESS, ELEC, HYD, FUEL, APU, COND, DOOR, WHEEL, F/CTL) included with all, status, recall and clear functions. T.O. CONFIG simulation fully supported and all pages will automatically show when needed. Master Caution/ Master Warning: fully operational, including audio and reset. Communication: Two VOR (with tuning by entering the name), Transponder and two ADF radios implemented in MCDU. Two VHF and Audio Control panel. Fully compatible with Go Flight, Saitek, VR Insight etc without any additional software. Flight controls: two ELAC, two FAC and three SEC computers, with mechanical flight control backup, operating under normal law protection (load factor limitation, pitch attitude protection, high AoA protection, high speed protection). Full FBW system. Speed brakes and spoiler with ground spoiler control system. All flight controls fully linked to hydraulic systems. Fully featured ECAM F/CTL page. Slats and Flaps systems fully featured and fully compatible with all additional hardware. TCAS: Fully implemented with 4 threat levels (default, proximate TA, RA) in navigation display, including sounds. Navigation: Uses updatable Navigraph navigation database. MCDU features: Main menu: Aircraft status Panel state Load/save module with preset: Cold & Dark Ready to taxi Ready for take off Cruise User setups Doors and equipment: Opening doors and cargo holds Cones and wheel chocks External power cart (visible & invisible for AES) INIT A and B: DEP/ARR airport entry Managed cruise altitude ZFW and Block fuel entry PERF pages: Take Off V-speed entry (manual or auto calculated) Transition altitude Take off flaps position Flex temperature Climb Cruise Descend Approach: Decision height Minimum descend altitude Progress page Fuel prediction page Data page with GPS IRS position monitor Nearest airport list Flightplan page Direct-to page Radio navigation page VOR, ILS , ADF radio tuning and course setting Flight planning: Flight plans can either be loaded via the standard FSX flight planner or entered manually. Flight plans made by 3rd party tools (FSBuild, FS Commander etc) can be imported as long as they can be exported to standard FSX flight plans. Flight control unit (autopilot) features: Selected modes: Auto throttle speed Heading Altitude Vertical speed Managed modes: Auto throttle speed set according to altitude LNAV Managed lateral mode, follows MCDU flight plan VNAV Managed vertical mode: note that VNAV is simplified to be easier to use. Sets both speed and climb behavior according to aircraft altitude Starts descend automatically when reaching TOD Navigation display features: ILS, VOR, NAV, ARC and PLAN modes Range settings: 10-320nm Flight plan with waypoints TCAS information ADF/VOR info GPS Intersections, NDB?s, VOR?s and Airports can be selected for display Primary Flight Display features: Artificial horizon Airspeed and altitude Autoflight settings ILS info V-speeds Flaps, slats and gear retraction/extension speeds VMO (max speed) Alpha floor and alpha max speed tape Green Dot, Vmax, Vls, Vapp, and many more speed tape indicators System requirements: Microsoft Flight Simulator X (SP2, Acceleration or Gold Edition) Windows XP / Vista (32Bit or 64Bit) / Windows 7 with the latest Service Packs Microsoft Visual C++ 2005 + SP1 Redistributable Package Microsoft Visual C++ 2008 + SP1 Redistributable Package Intel Core 2 Duo CPU (2x 2666Mhz) or equivalent (Core 2 Quad CPU recommended) 2 GB RAM DX9 Graphic Card with at least 256 MB (512 MB highly recommended) Mouse with mouse wheel Joystick with throttle Download-Size: 240 MB Installations-Size: 500 MB Manuals and smartphone checklists can be downloaded from the aerosoft site. watch the first PMDG 737 ngx external screenshots: uploaded by me!!!

udp://tracker.openbittorrent.com:80
udp://open.demonii.com:1337
udp://tracker.coppersurfer.tk:6969
udp://exodus.desync.com:6969

olufsen01 (2011-02-01)

Do this aircraft have a 2d panel? I have a 4 screens simulator, and cant use Virtual cokpit....

olufsen01 (2011-02-01)

werry low seed?

olufsen01 (2011-02-01)

why is my coments hide? SEED! and have this plane 2d panel? i use 4 screens in my cokpit

A380-800 (2011-02-01)

REQ dangerous Airports 1!!

Capt.Jambo (2011-02-01)

Hello!
Thanx for upload.
For those wondering if this add-on has 2d panels, IT DOES NOT HAVE 2D PANELS.
@ NvidiaPhysX, If this is your own release why don't you share the latest version? something like V 1.22?

pumpernickel (2011-02-01)

Just for info: It has no 2D panel - only in 3D.

Capt.Jambo (2011-02-01)

NvidiaPhysX
I do not understand your answer. Am I supposed to guess?
Once again thanx for sharing.

Capt.Jambo (2011-02-02)

ok NvidiaPhysX, I have download this and read the info you made. Can we expect you to upload version 1.22, because we cannot download the updates from Aerosoft and the info stats that the crack will also work with updates.
Thanx again

BasilHoneycup (2011-02-02)

1.22 is already to be found on TPB, the FMC is more or less a luxery version of the GPS. Aerosoft did a great job on system simulations and graphics except for the FMS, no SIDS/STARS etc etc.. For you whom are used to PDMG or Wilco this AirbusA320 is like the Ariane B737 = it looks beautiful but is very incomplete. Thx for the upload

Thyx747 (2011-02-02)

Thanks NvidiaPhysX. Was waiting for this good upload

Capt.Jambo (2011-02-03)

@ NvidiaPhysX
That indeed is an answer I was expecting, strait forward. I'm already downloading v 1.20, 21 and 22 from http://thepiratebay.se/torrent/6145294.
Once again thanx a lot for taking time and money to provide us with this bird.
As usual, I will seed full speed all torrents I download, this one will be no different.
RESPECT

moonknight (2011-02-03)

good work, very kind from you mate.

placemat1212121 (2011-02-06)

This installs and works a treat!
No 2D panel for those who are asking, but vitual cockpit is the only way these days for ultimate reality.
Superb sound and flight dynamics.
Thanks very much for the kind upload NvidiaPhysX!

STA122 (2011-02-22)

FMC isn´t working with SID/STAR´s and when on Final at 200ft trim take nose down. Your upload is a fail

rasta2465 (2011-12-29)

how can i uninstall this? because i want to install your 1.20 version. Thanks

Head5hot (2012-06-04)

Any chance for Extended Edition?

[P3D]Alt. (2015-06-16)

Why does it say could not load DLL path?
I followed all the steps and replaced the .dll file