Amsterdam Full 1 03 & Bergen 1 00 incl bglman-esellerate crack!

This is Amsterdam 1.03 Full and Bergen 1.00 The reason I upload this, is that apparently Cloud9 has removed these sceneries from their download site! The bglman.dll & eSellerate crack is also included in this file!! ------------------------------------------------------------------------------------- I got this to work both with Amsterdam 1.04, Bergen 1.01 and the rest of Cloud9 sceneries (e.g LAX) What I did was simple! (this worked for me - dunno if it works for you - but here goes...) 1. Install AMS 1.03 and Bergen 1.00 as described, and uploaded already... (with use of cracked bglman.dll and cracked esellerate dll's) 2. Once fully activated backup reg key for both airports! 3. Uninstall Amsterdam & Bergen (both updates and "main" scenery) DON'T restart or remove anything else... dont worry about bglman.dll as it gets overwritten in the next step! 4. Install Amsterdam 1.04 Full and Bergen 1.01 Full (download from www.fscloud9.com) DON'T start FS9 yet! 5. Run Cloud9_Amsterdam.reg and Cloud9_Bergen FS9.reg (default dir FS9 root) The backup reg-keys from step 2!!! 6. Copy esellerateengine.dll and esell3658.dll to windows dir (overwrite if required!) 7. Start FS9 and check if everything looks fine and working... The above worked for me... In the procedure the original bglman.dll is kept! No cracked bglman.dll is needed here... at least not in my case... BE ADVISED!! - THIS PROCEDURE DOES NOT WORK FOR ZURICH AND FSDT'S SCENERIES (EXCEPT BERGEN)... THEY'RE USING A DIFFERENT PAYMENT-SYSTEM... ------------------------------------------------------------------------------------- In the procedure described above, you end up using the original bglman.dll! This means, that I would advise you to install all Cloud9 sceneries with the crack, and then patch AMS & BGO in the end... The good news is, that you can use FSDT Zurich after installing, because you are using a genuine bglman.dll/dat file in modules folder... (can't be cracked yet, but it's good if you purchased it...) :-) All credits goes to the genius' who made this crack!!! :-) Please let me know of results...

udp://tracker.openbittorrent.com:80
udp://open.demonii.com:1337
udp://tracker.coppersurfer.tk:6969
udp://exodus.desync.com:6969

KingMusjo (2008-02-01)

This is tested and working!!!
Just follow the instructions written here (and above!) to a T!
Remove all sceneries from Cloud9, also make sure to remove all registry entries (Usually in HKEY_LOCAL_MACHINE/SOFTWARE and HKEY_CURRENT_USER) both remove all entries from Cloud9 AND esellerate!!!
Remove folder Cloud9 from FS9 root dir and bglman.dll/dat connected to that from FS9/modules folder!
Actually step 6 is not required...
Once the above is done - continue with instructions in the "What to do....txt" in download, or what I have written in the torrent-description... :)

slasherblazer (2008-02-02)

Hi, how exactly do I install the other C9 products? Must I install them together with AMS 1.03 and BGO 1.00 or install them after AMS 1.04 and BGO 1.01

KingMusjo (2008-02-02)

Hmm - maybe i didn't explain it... :)
The regkeys are just for checking!!! If they aren't there, they are removed already... just check if they exist, and remove them if they do...
I would advise you to uninstall all cloud9 products and remove bglman.dll & bglman.dat bglman_fsdt.dat if it exists... (ALL files with the word "bglman..." in them from the modules folder!)
Also check that the regkeys are present... if so - remove them!
Then continue with step 1. and isntall ALL cloud9 sceneries that you are planning on using... :-)
The step 2... etc
Hope that helps!

slasherblazer (2008-02-02)

Hi, I installed the other addons with 1.03 and 1.00, "bought" all, uninstalled 1.03 and 1.00 and installed 1.04 and 1.01. Then I put in the reg keys for ams and bgo again. Now FS9 will quit immediately after the splash screen.

slasherblazer (2008-02-02)

Hi, do you have any other cloud9 addons than ams and bergen?

paul428 (2008-02-02)

Guys im obviously doing something wrong. I installed amsterdam 1.03 and bergen 1.0 but i cant find any reg keys to back up. Where will i fond them?

slasherblazer (2008-02-02)

I understand how it would work if I just install AMS and Bergen, however I don't know how to work it with other C9 addons like LAX, Phantom,etc. Currently experimenting

KingMusjo (2008-02-02)

Hifin... Did you get it to work, when you reinstalled FSUIPC? Co's maybe that's the problem...
I'm currently running with an unregistrered version of FSUIPC v. 3.75 downloaded from the link you provided... Found out, that when I tried to activate FSUIPC with a license key (found in here actually) the game crashes... also if you are using PMDG at the same time...

KingMusjo (2008-02-02)

I'm fine with an unregistrered version, since i'm not using any of the functions required to activate...
Both AES and PMDG etc, will work fine with an unregistrered version...

KingMusjo (2008-02-02)

You could also try to skip the uninstall process, and simply install the full versions (with a repair or so if it asks...)
Haven't tried this, but maybe that could be a solution...

slasherblazer (2008-02-02)

I found the solution! - Use the update. Just install 1.03 first then "Buy" it before updating to 1.04

KingMusjo (2008-02-02)

Yearh!!! That's great...
The update is working with Amsterdam - although I haven't got the update procedure to work with Bergen...
The buildings keep disappearing :-S
Of course that's the critical part of the installation!!! BUY the scenery when you have installed AMS 1.03 and BGO 1.00 and THEN install either the update to 1.04 for AMS and 1.01 for BGO, or install the full sceneries...
After that, start FS9... I don't really know if it's required to add the registration info after update... (you can try with and without)

KingMusjo (2008-02-02)

Try downloading the newest version of FSUIPC and leave it unregistrered (if you haven't bought it already...) Don't use any serial/cracks to purchase it!
I got a lot of problems when trying to activate FSUIPC 3.75 with serials/cracks found here... :)
Other than that I don't understand this...
1. Remove ALL Cloud9 Sceneries AND files connected... (including regkeys, bglman files in modules folder and eSellerate files in Windows folder)
2. Reboot (don't know if it's required)
3. Install ALL Cloud9 Sceneries you are planning on using
4. Copy bglman.dll/dat crack and eSellerate crack in their respectory directories...
5. Start FS9 and activate ALL Cloud9 sceneries you've installed.
Don't worry about, if the sceneries aren't displayed in the Scenery Library in FS... If the scenery is displayed correctly and it's starting up with "Trial version has begun..." everything should be OK!
6. IMPORTANT - Backup license keys for Amsterdam & Bergen after succesful activation!
The default dir for saving these is FS9 root dir (where FS9.exe is located!)
7. Install Bergen 1.01 & Amsterdam 1.04 (either full of updates) and apply the saved reg files afterwards...
8. Nothing else is required!!! Don't copy any cracked bglman.dll/dat's (or delete anything else!) and don't copy/change eSellerate files in Windows folder!!!
This procedure will function with the original bglman.dll/dat files in FS9/Modules folder!
Other that the above, delete FSUIPC related files in modules, and download newest from http://www.schiratti.com/dowson.html (which is 3.75)
Just to eliminate this! :-)
Hope this helps!!! :-)

KingMusjo (2008-02-02)

Hehe! :)
Hmm - I guess I should have explained it more carefully...
When I refer to "activate" I mean: Click on "Addon Manager" -> "Cloud9" -> Scenery to activate/buy (e.g "Amsterdam")-> Click "Buy"
You will then get the "pirate-version" of the purchase phase... (if you get the usual eSellerate screen, the crack (bglman.dll & esellerate.dll's isn't properly installed in modules and windows folder!!!) delete what ever is written in the box, and enter any number in and hit "Enter".
The screen will go black, and a messagebox will read something like: "Thank you for purchasing. The scenery is now active!".
Repeat this process until all Cloud9 sceneries you've installed is "bought" using the "pirate-buyer".
After this, select "Addon Manager" -> "Cloud9" -> Cloud9 Airport/Scenery (e.g "Amsterdam") -> "Backup RegKey".
The screen will go black again, and a message box will read:
"Backup registration key saved to: Cloud9_Cloud9 Scenery/Airport.reg (e.g "Amsterdam")
Use it for future Reinstallations on this PC."
Hope that helped a little :)

bh522 (2008-02-03)

Sorry but this doesn't work. I follow the steps, create my own... noting seems to work with Cloud9. Only when I install the setups in this torrent and do the "buy" process, the sceneries works fine (old versions). But when I restart FS (even without change a thing), it doesn't start anymore (the whole FS). Too bad.

slasherblazer (2008-02-03)

do other sceneries work too?

KingMusjo (2008-02-03)

Hffin...
You've been added!!! :) - or rather accepted
I'm glad to hear that it's finally working... thought I was loosing my mind...

slasherblazer (2008-02-04)

Hi, for some reason after install 1.04 and 1.01 after installing and activating the other sceneries, it wont work.FS9 will quit after the splash screen

slasherblazer (2008-02-04)

btw has anyone tried this with phantom or frecce? that might be the problem

b773 (2008-02-04)

Thanks KingMusjo , I did them your instructions step by step , Now I have EHAM 1.04 and also KLAX ans KDCA ( I have to re-download KDCA patch 1.01 due message in FS srtat)

unlisence_pilot (2008-02-05)

crashed after buy 1.03 AMS
reinstall everykind of FSUIPC and still happen
I'm trying to figure out why but still can't find out >"

KingMusjo (2008-02-05)

Download link for video turorial

KingMusjo (2008-02-05)

KingMusjo (2008-02-05)

Please correct download link youself!!!
*** = http://www.rap :)

unlisence_pilot (2008-02-05)

holly cow thanks a lot
oh well,the crash part I got it fixed by restart my window
but now..I did everything right,without crash,but I can't get any building to show up T_T
downloading the video :D

KingMusjo (2008-02-05)

Sorry!!! Typo!

The above torrent includes AMS_1.03_Full & BGO_1.00_Full since Cloud9 removed them from their website!
Apparently there was alot of problems to make it work correctly, so I made this little video-tutorial myself, to show people how it's done...
This is made from an clean FS9 installation, and a clean fresh installation of Windows XP SP2. (I've tried the procedure on Vista to, and it should work as well...)
This video covers the installation from scratch AMS_1.03_Full and BGO_1.00_Full (and LAX & DCA) to applying the crack, "buying" the sceneries using the crack within FS9, and after that patching to version 1.04 for AMS and 1.01 for BGO. After this, it covers installation of AES v1.94, and activation of AMS & BGO in AES - And demonstrates that it's working as it should! :)
What you need to complete the video-tutorial:
AMS_1.04_Full (Available from www.fscloud9.com)
BGO_1.01_Full (Available from www.fscloud9.com)
This torrent.
And this video file! (See download link above!)
Hope this helps
Let me know of results...

unlisence_pilot (2008-02-05)

uhm.....the links don't work...

unlisence_pilot (2008-02-05)

you forgot dot com ( .com) lol

unlisence_pilot (2008-02-05)

do you have msn messenger/yahoo messenger or email please give me,so it will be easier :D

unlisence_pilot (2008-02-05)

number II link doesn't exist

KingMusjo (2008-02-05)

Links should be corrected now!

unlisence_pilot (2008-02-05)

thanks very much, I'll be in contact close to you =D
will report the result as soon as possible,hope it works..

unlisence_pilot (2008-02-05)

thanks,I got it worked :x
After I activate AES 1.94 all buildings came up and the AES works too,so I think it's the layer scenery problem(Run AES to fix it)....
thanks a lot kingmusjo,your one of the best =)

slasherblazer (2008-02-07)

rapidshare keeps telling me that I am downloading something even though I am not. Can you email the video to me please?
[email protected]

KingMusjo (2008-02-07)

Hmm - it's quite a large video to email... it's aprox 150MB!
Besiden the download links does work... just tested them...
I could email them to you, if you have enough space to receive such large files... :)
Please write back in here what you think?

slasherblazer (2008-02-07)

hmmm...can you try megaupload or any other web hosting service?

unlisence_pilot (2008-02-07)

I can't get FSDT zurich to work T_T
can anyone??

KingMusjo (2008-02-07)

I'm uploading it to Megaupload instead... :)
Link on the way! The movie is a bit larger.. (156MB) because it's better quality than rapidshare...
I don't know what you mean regarding that you can't get it to work with Zurich...
The crack doesn't work with Zurich currently!!! Not unless you've bought it! I've tested the procedure with the trial version of Zurich - and there was no problem! - Just make sure, that you (of course) install Zurich scenery as the last scenery... :)

KingMusjo (2008-02-07)

Here's download link for Megaupload!!! :)
yyyxmegauploadxcom/?d=5QW1LH0R
What you're seeing, is the procedure described in this torrent-description! :)
Let me know what you think!
Enjoy!

KingMusjo (2008-02-07)

whoops!!!
There's (traditionally) an error in the download link... here it is again! :)
yyyXmegauploadXcom/dk/?d=5QW1LH0R
Replace:
X = .
y = w
(if anybody should be in doubt)

unlisence_pilot (2008-02-08)

I thought it works with FSDT,oh well I'll use FREEZ =)
You're very nice kingmusjo,very rare around here ;)

sim_lover (2008-02-28)

What's the procedure with Vista?

Phil82 (2008-03-14)

this guidance with ths avsim hack picture doesn´t work anymore. they have changed it and i lost my cloud9 scenery´s through updatin eham on 1.04! :-/

jimbob493 (2008-04-27)

Can some1 plz upload FSDreamTeam's Chicago 'hare International for FS9. If anyone can help, i will be extremely greatful.

Phil82 (2008-04-28)

KORD is impossible, accept dad :-/

frederik92 (2008-04-29)

thanks a lot, it works for me now...:)

jimbob493 (2008-05-03)

Everything is possible. How about some1 buys it and uploads the installer with a txt doc. telling us the serial and whatever else.

jimbob493 (2008-05-03)

Or how about a rip?

melvinho (2008-05-07)

It stil don't work here. I have done the first steps:
- I have installed EHAM 1.03
- I have placed the crack files blgman.dll / dat in the modules map and esellerate dll's to "Windows"
- Then i have started FS9, but i get a error that the blgman.dll don't work?
Wat i am doing wrong?
(sorry for my english :P)

melvinho (2008-05-12)

Nobody can't answer my question?

GoldenScimitar (2008-05-27)

The real problem is this:
There are no complete Cloud9 or FSDreamTeam downloads in TPB under the same BGLMan crack. So basically, even if I install 2 sceneries from Cloud9 that are under the same BGLMan, if I tried to install another Cloud9 airport available from TPB with a different BGLMan version, then that particular one will work, but the other cracks will be overwritten, making it hard to complete a full Cloud9 collection.
My request is, ALL Cloud9 sceneries under the SAME BGLMan crack. Please respond back to this. Thanks.

ready2taxi (2008-05-27)

Yo, Win VISTA friends, here it goes...
1)Installing 1.03 with the dat's and dll's files
2)registering
3)making a .reg backup
4)uninstall 1.03
5)install 1.04
6)run cloud9(...).reg
7)and copy again dll's to windows, like KING said, in fact WORKS!!!!
THE ONLY DIFERENCE TO WIN XP IS THAT IN VISTA YOU MUST HAVE USER(YOURSELF) PERMISSION TO CONTROL TOTALY FLIGHT SIMULATOR 9 DIRECTORY BY RIGHT CLICKING THE FOLDER AND EDIT THE SECURITY SETTINGS. CLOUD9 NEEDS TO COPY A NEW ESELLERATE FILE TO FS9 FOLDER AND OTHERWISE IT CAN'T MAKE IT! RUN FS9. IF IT STILL CRASHES, JUST DELETE THE FILE ESELLERATE FROM WINDOWS DIR AND THEN RUN FS9 AGAIN AND IT SHOULD WORK FINE NOW! AT LEAST FOR ME IT WORKED! By now if anybody whould like to share some serials for AES 1.95a to use with other sceneries i would apreciate a lot. Tks a million
[email protected]

GoldenScimitar (2008-05-27)

...but the crack is old. And the problem here at TPB is the fact that for every Cloud9 airport download here, there's a different bglman crack for each and every one of them.
REQUEST: NEW CRACK FOR CLOUD9 PRODUCTS!

Richie800 (2008-06-01)

Can anyone with a working installation upload their backup reg file? With this, all we have to do is install the scenery and then install your reg file. No activation, no .dll file, no virus to worry about. Nice and simple. This may even work for other Esellerate products

airbus340 (2008-09-29)

When you install EHAM scenery in this way do AES work with it or not?
Thanks!

haavard81 (2008-11-04)

Trojan in one of the esellerate files.
"win32/polycrypt"

sandertjah12 (2008-11-17)

Hi, I installed the 1.03 amsterdam and placed the cracks in the good folders, but when I'm in FS and i choose addon manager-amsterdam-buy, the normal esellerate screen comes up, I'm working with Windows Vista and I've installed the Cloud9 1.03 scenery before and it worked at that time, but I installed a fresh FS2004, so it's been deleted, can someone help me please?
Thanks,
Sander
Ps: Sorry for bad english!

nawangweallan (2010-04-29)

Is it me or doesn't this method work anymore?