UGS.NX5-MAGNiTUDE

It\'s the last NX and you can enjoy with it. Please see UGS.NX5-MAGNiTUDE\\DISK1\\MAGNiTUDE\\install.txt

udp://tracker.openbittorrent.com:80
udp://open.demonii.com:1337
udp://tracker.coppersurfer.tk:6969
udp://exodus.desync.com:6969

ilfo (2007-06-05)

I see now that there are only 3 seeders here. And I am seeding of 2 of them. Please seed it because It is the real idea - more people to have it.

ilfo (2007-06-13)

Downloaded 36times Seeders 6......
Fuck off I will not seed anymore... egoists

ilfo (2007-06-20)

Hi, downloads 74 seeders 6 thank you people, I thougt to delete the torrent but I will seed againn
So much dead souls... just write a comment

CybotTM (2007-08-04)

not every download here does really start to download in torrent too ...

gvdrnk (2007-08-27)

Can someone please tell me how I can get this to work? I keep having the following error: NX License error: the license server hasn't been started yet.
I don't know where to copy the cracked license file.

vandalisator (2007-09-01)

I have also trouble finding the directory for the license file. Please write a more detailed desciption of were to put the files.

ilfo (2007-10-05)

ok... this is the MANUAL
1. you must install license server first
during the instalation of it you will be asked to "finger" the license file... this is the lic file
2. after that you must install NX5
3. you must copy files from
DISK1\MAGNiTUDE\Program files and paste on it's places
DO NOT JUST copy and paste DISK1\MAGNiTUDE\Program files over
C:\Program files
copy and put file by file on it's place
4. restart
5.open START, All programs, UGS NX 5.0,NX Licensing Tools, License Options
6.you will see Bundle Selection, so choose modules that you want to use
7.you must choose only two of them simi....
in original NX the situation is the same
8. I am using for my normal work ADVDES and MOLD_DSNC
9.close Bundle Selection
10.enjoy
By the way there is exellent instalation guide on the disc1 writted by UGS... just read it

philipoo (2007-10-10)

please start seed this torrent. :(

jhorjz (2008-01-24)

no bundle license after installation, do i need to copy also the .lic file in he license progam on C:.... What file do i need to copy, the only file under the Magnitude/Program files/UGS/........including the .lic under magnitude. or all files under the Disk1.... pls. help

avi_sham (2008-02-07)

Thanks for UG NX5. I really required that.

jheard7000 (2008-03-07)

I am having problems getting Nastran to show my analysis results. Does anyone know what I need to do? I can open nastran and input all of my information but it will not show/calcuate results.

cuau02 (2008-03-19)

I followed ilfo manual and still not getting it to work. I'm getting an unknown license error. Plz help, anybody!!!

willzville (2008-04-13)

REAL INSTRUCTIONS FROM MAG:
Installation Notes
1.Run Launch.exe
2.Install NX (license server must be installed first)
3.Select Custom dialog and install all options
4.Finish
5.Open MAGNITUDE\nx5.lic using notepad
6.Edit this_host in the first line to your computer name and
Save to: NX5 instal dir.(Program files\UGS\NX 5.0\UGFLEXLM)
7.Install UGS License Server
8.When asked for license file,
Browse to: Program files\UGS\NX 5.0\UGFLEXLM\nx5.lic
9.Finish
10. Copy MAGNITUDE\ugs_common.dll to Program Files\UGS\NX 5.0\NXPLOT,and Overwrite
11. Copy MAGNITUDE\pdf\Ugs_common.dll to Program Files\UGS\NX 5.0\NXPLOT\bin\pdf and overwrite
12. Copy MAGNITUDE\UGII\ugs_common.dll to Program Files\UGS\NX 5.0\UGII and overwrite
13. Restart PC and enjoy.

willzville (2008-04-13)

Oh yeah please seed this... it 100% works if you know how to crack it (follow above)

willzville (2008-04-13)

I have UGS CAST for NX5, but I don't know how to upload it for torrent soo... soz.

nx5xn (2008-04-16)

warning .. after 60 days files prt will unable to open

CoupedUp (2008-04-16)

I am stuck...I have a few questions.
1) What do you mean Install UGS License Server? Install it a second time? Or something to do with the Licensing Tools???
2) Also in the .lic file, should it be:
"SERVER this_host ID="PCName"
VENDOR ugslmd"
Nothing after the PCName right? Or should there be a number after such as "28000"?
3) During install it asked for FlexLM Server(s). What should I put in there?
4)After 60 days prt files will be unable to open? Huh?
Thanks!

gcgi1959 (2008-04-17)

Does it really quit after 60 days? Is there a workaround?

ilfo (2008-04-28)

/Does it really quit after 60 days? Is there a workaround?/
I am gonna upload a torrent with an update of NX5

ilfo (2008-04-28)

the name of update torrent is UGS.NX5-MAGNiTUDE-update

ilfo (2008-04-28)

After instaling the update You will be able to use your old NX files.
Also I am gonna to upload a NX5CAST(self teaching program)torrent - it's name will be UGS.NX5-MAGNiTUDE-CAST
and update for NX5CAST - UGS.NX5-MAGNiTUDE-CAST-update

gcgi1959 (2008-05-08)

Thanks so much info!

robithebest (2008-05-22)

Hello Everybody!
Could somebody crack NX5.0.2.2 ?
If somebody could do it, please write it down from the first step! Please!
I would like to use it urgently, but I can't. :-S
Thank you very much!

kriok67 (2008-08-21)

Hi,
I,ve reintalled NX5 in my PC, and i can't open old files from nx5. My old files from nx3, from 2 year ago, I can. when I try, this message apears:
"Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\UGS\NX5\UGII/ugs_router.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact...
"
I'm running cracked NX 5.0.2.2 on windows xp pro.
Any suggestions on what the problem might be?
Thanks

oz1627 (2008-08-21)

if anybody has the mold wizard package PLEASE!!!! upload that shit ..thanks

likeathiefinthenight (2008-09-05)

Anyone know where I can find either NX 5 or NX 6 for linux? Anyone seen it around. Can't seem to find a real one anywhere. DL'd one already but turned out to be mislabeled and was for windows.

12345Vtech (2008-11-09)

will states
10. Copy MAGNITUDE\ugs_common.dll to Program Files\UGS\NX 5.0\NXPLOT,and Overwrite
11. Copy MAGNITUDE\pdf\Ugs_common.dll to Program Files\UGS\NX 5.0\NXPLOT\bin\pdf and overwrite
12. Copy MAGNITUDE\UGII\ugs_common.dll to Program Files\UGS\NX 5.0\UGII and overwrite
But all I see after I open MAGNITUDE folder is Program Files, install and nx5. Where is ugs_common.dll located so that I can copy it and past it to the locations that he indicates?.

directprop (2008-11-11)

Does anyone know why I'm getting this error?
Cannot connect to license server system.
The server (lmgrd) has not been started yet, or the wrong port@host or license file is being used, or the TCP/IP port or host name in the license file has been changed

directprop (2008-11-11)

Continued....
1. When I launch License Options ther are no Bundle's shown to select.
2. When I launch NX 5.0 I receive this error;

Initialization error -
NX License Error: The license server has not
been started yet, or UG_License_Server is
set to the wrong port@host. [-15 ]
3. When I launch lmtools the server is running.
4. I also verified with task manager that "ugslmd.exe" & "lmgrd.exe" are running.
5. I also verified that "Sentinnel" is running.
6. I added all the cracked files of "ugs_common.dll and replaced what was in all directories.
7. #10 on your "Installation Notes" I'm assuming is not correct. You have to copy from cracked file "Magnitude\ugs_common.dll" which there is no .dll file there but there is one in cracked files \UGS\NX 5.0\NXPLOT which is the file I used to overwite this one.
8. I think I covered all my bases here but I still can't see any license bundles to select. I even went to the UG Licensing guide and verifed everything was correct.
If you could please respond with what I might be doing wrong it would be greatly appreciated.

j33v3s (2009-01-05)

Right, after much searching on the internet I've got this working. I will now write how I did it in hopefully a simple to understand way, so anyone can install this brilliant program (and in my case, finally do my coursework :P)
As alot of the guides say it's important to install the license server first I shall follow that order to avoid confusion, but it doesn't actually matter since I installed NX5 first.
1) Run Launch to get the splash screen with four buttons
2) Click install UGS License Server
(alternatively, if you know what you're doing you can go directly into the license folder and run setup.exe)
3) Open the NX5.lic file with notepad (it is in the MAGNiTUDE folder)
4) Edit the first line so that it says
"SERVER this_host ID="PCName"
VENDOR ugslmd" 28000
where this_host is your PC name (can be found by going Control Panel>System>Computer Name)
5) Follow the instructions and when it asks for the location of the license file, locate it (doesn't matter where it is, I put it in C:/Program Files/UGS)
6) Go back to the launch splash screen you opened earlier
7) Click Install NX5
(alternatively, if you know what you're doing you can go directly into the NX5 folder and run setup.exe)
8) Select custom install and select all options
9) At some point during install it'll ask for the server hostname or something similar (basically a test box where you have to type something), it should already be computer_name@28000. If not, write your computer name then @28000.
10) Copy over the .dll files in the MAGNiTUDE folder into their correct places in the UGS/NX5 folder. Don't worry about NASTRAN if you haven't installed it.
11) Restart computer (not sure if this is necessary, but I did)
12) Start>All Programs>UGS NX 5.0>NX Licensing Tools>License Options
13) Select whatever bundles you want (don't know what they actually do, if someone can enlighten me please do)
14) Click ok, then run NX 5
Hope this helps people
Thanks to MAGNiTUDE for a great upload

Hamidku (2009-01-25)

when I open the nx5.lic I have this at the top:
"SERVER this_host ID=20070424 28000
VENDOR ugslmd"
Should I change this to "My computer name=20070424 28000 VENDOR ugslmd"???
thanks

Hamidku (2009-01-25)

by the way, will this work with vista???

geotech (2009-01-28)

J33v3s is correct with his method I can confirm it. though part of his instructions were slightly wrong.
In step 9 it says "9) At some point during install it'll ask for the server hostname or something similar (basically a test box where you have to type something), it should already be computer_name@28000. If not, write your computer name then @28000." but that is wrong. It must be 28000@computer_name then it will work. Small mistake everything else works ...Props to J33v3s

Darude90 (2009-02-05)

can anyone please help me on how to install nx5? im lost here:
4) Edit the first line so that it says
"SERVER this_host ID="PCName"
VENDOR ugslmd" 28000
so lets say my pc name is Laptop then it should be like this?
"SERVER Laptop ID="PCName"
VENDOR ugslmd" 28000
or how?

idcool (2010-02-12)

right lets clear this up!
because i was confused too.
this is what i did with the license file and it works...
what you do is find your pc name (which has already been explained on how to do that)
then where it says "this_host" replace it with your computer name
e.g.

you start with:
SERVER this_host ID=20070424 28000
VENDOR ugslmd
if your computer name is bob-5637
then it will goto:
SERVER bob-5637 ID=20070424 28000
VENDOR ugslmd
You can save this file anywhere when installing the license server.
BUT when you have installed the NX5 program itself make sure you save this modified file in this folder:
Program files\UGS\NX 5.0\UGFLEXLM\
i recommend a look at willzville's guide on page 1
hope that helps

dscspbr (2011-11-05)

Program does not display objects correctly. Is anybody having these same issues? Or any idea on how to solve this?