prolight cnc nc mill controller and emulator

this is the other emultator and controller for cnc mill as i promised this is what we were trained with in collage cnc prolight i think it was relaesed in 2004

udp://tracker.openbittorrent.com:80
udp://open.demonii.com:1337
udp://tracker.coppersurfer.tk:6969
udp://exodus.desync.com:6969

dhaqur64 (2008-08-29)

Didn't teach you English though

wethecom (2008-09-03)

come to get free software and complain about my english

wethecom (2008-09-03)

ill try to find some sample code
that i wrote in school
because its not fully documented in the help files

wethecom (2008-09-03)

G0 G90 X-2 Y0 T0 M6;G90 ABSOLUTE PROGRAMMING MODE;G0 RAPID TRAVERS
M3 S1500;M3 POLAR PROGGRAMING;S1500
G41 D1 ;41 LEFT CUTTER COMP ON 0.25
Z.05; DEPTH
X-1.5 Y0;TOOL MOVEMENT
M98 P1000 L4; M98 CALL SUB
G90 G0 Z.6 X-1.5;G90 ABSOLUTE PROGGRAMMING
G40;CANCEL CUTTER COMP
G0 X0 Y0 Z.05 G42 D2;G42 RIGHT CUTTER COMP ON ;G0 RAOID TRAVERSAL
X-1.5 Y0;;TOOL MOVEMENT
M98 P1000 L4;M98 CALL SUB
G90 G0 Z.6 X-1.5
G40;CANCEL CUTTER COMP
G0 X0 Y0 Z.05 G42 D3;G42 RIGHT CUTTER COMP ON D3 =.125
X-1.5 Y0
M98 P1000 L4; M98 CALL SUB
G40 G90 G0 Z.1;CANCEL CUTTER COMPG40 CUTTER COMP OFF
O1000;SUB PROGRAM
G91 G1 Z-.112 F6;F6 FEED 6
G2 X0 Y0 I1.5 J0 F8;G2 ARC
M99;RETURN FROM SUB

wethecom (2008-09-03)

this has a drill cycle with peck thought it was inportant for new people so here you go
g0 g90 x0 y0 t2 ;m6 ; start program in rapid traverse and move to "home"
m3 s1500 g1 f10 z.05 ; start the spindle set the feed rate
g0 y-1.5 x0
g1 g91 z-.55 ; plunge back into the workpiece in absolute
g2 x0 y0 i0 j1.5 ; make circle 3 inch diam
t1
g90 ;back to incramental
g0 z.5
x0 y0
g1 z-.75
z.5
G83 Z-1.05 R0.125 Q.105 F5 ;quik canned drill cycle with peck of .105
X0.9998 Y0.0175
X0.7986 Y0.6018
X0.2924 Y0.9563
X-0.3256 Y0.9455
X-0.8192 Y0.5736
X-0.9998 Y-0.0175
X-0.7986 Y-0.6018
X-0.2924 Y-0.9563
X0.3256 Y-0.9455
X0.8192 Y-0.5736
g80 ;end bolt hole circle
t3 ;m6 tool change
x0 y2.1875
g1 z-.25
x2 y1
y-1
x0 y-2.1875
x-2 y-1
y1
x0 y2.1875
t1 ;m6 tool change
;prep for sub command
g90 z.5
x-2 y1.635
z0
M98 P1000 L1;end sub call
g90 z.5
x2 y1.635
z0
M98 P1000 L1;end sub call
g90 z.5
x2 y-2.125
z0
M98 P1000 L1;end sub command
g90 z.5
x-2 y-2.125
z0
M98 P1000 L1;end sub command
m2 ;end main program
o1000
g91
z-.25
x-.1035
x.207
x.207 y.207
y.207
y.207 x-.207
x-.207
y-.207 x-.207
y-.207
y-.207 x.207
;cut pocket
y.6
x.12
y-.6
y.125 x.125
y.355
x.125 y-.125
x-.05 y-.125
x-.425
y.175
g1
M99

wethecom (2008-10-11)

ask me any questions you might have i know this software well
it is ok better than freeware
there are amny un documented commandds why they are un documented i dont know
they are the best part about this app is the stuff thats un documented
canned cycles..threadint and what not

Gmc1600 (2008-11-16)

Very Nice!

Schmoomeister (2008-11-20)

hey wethecom how can I speak with you directly? I have some questions about using this software. Im currently apprenticing at a shop and really think this would be a great help.

Lab1Rat (2009-10-31)

took me forever to get an account again(formerly know as wethecom)
but is you have any question give me your email and ill get back to you

jabtko (2012-04-08)

Thanks

rjose422 (2012-06-28)

appreciated it .... thanks man.

Green.Lantern (2013-05-16)

thank you