XBOX 360 3 red lights fix guide

This is one of the best fixes out there and i paid a lot for it and i dont think that anyone should have to pay for anything

udp://tracker.openbittorrent.com:80
udp://open.demonii.com:1337
udp://tracker.coppersurfer.tk:6969
udp://exodus.desync.com:6969

Meho Krljic (2008-05-24)

Hopefully no one is stupid enough to fall for this, but just in case: if you think that a 276 kb file will fix your Red ring of Death issues (which are hardware-based and happen to be related to the lousy materials Microsoft uses to build its consoles) then by all means proceed downloading this trojan or whatever it is.

_BlackDragon (2008-05-24)

Its a guide Meho >_>

Meho Krljic (2008-05-25)

I stand corrected then and apologise to blazeshadow. If he indeed paid for this, then he gets all the salutes in the world for sharing it.

xxblazeshadowxx (2008-05-26)

damn right it ain't a Trojan i will never upload trash

xxblazeshadowxx (2008-05-26)

by the way i did this fix and my 360 has been working for weeks

xxblazeshadowxx (2008-05-29)

hot air gun but a good hair dryer will work but thats because i have one on hand

twistedduck (2008-06-13)

so does this really work? i have the ring of death and the towel trick does not last 4 long if not does anybody know a torrent that will help me

xxblazeshadowxx (2008-07-13)

yes it does work and the 360 that i did it on is still working it has been a little over a month now

xxblazeshadowxx (2008-08-10)

like A HAIR DRYER on high since it gets no where close to the power of a heat gun and id say about 5 min on the cpu and gpu switching between them every minute or so to get the best result

xxblazeshadowxx (2008-08-10)

3 months now

ainrue (2008-08-21)

so I may have to do this to my xbox if it keeps freezing and such.
Any idea how/why this works? My guess would be that moisture in the system can gather and this evaporates it, OR M$ did a bad job on the soldering part and some of their solder points may have hairline fractures cause by heating and cooling of the system through normal use. This may heat up that solder enough to re-seal/reconnect it.
other than those guesses, I'm tapped out. anyone?

vdubdubv (2008-10-27)

CLEAN YOU GUYS ARE FUCKIN ASSHOLES CAN NEVER GIVE A CLEAR REMARK I DOWNLOADED THIS AND IT IS GOOD FUCK YOU PREVIOUS POSTERS

mallebank555 (2008-11-16)

I used this guide to fix my 3 red flashing lights a couple of months ago (mid summer). Now the problem is back. Why? I don't know, but at least I know how to fix it (again). Anyway, what I wanted to say was, that this method works just fine, just don't go crazy with the heat gun. A hairdryer might not do the job properly though. Remember when you have done this properly, the parts are close to glowing and the board is hottt;)
My error code is 0020 by the way, same as before. So you guys know which errors this method fix/postpone.

xxblazeshadowxx (2009-03-11)

Almost a year now guys i have had no problems what so ever

Dannyza (2009-09-08)

nice up dude fixed my xbox

x4u2sm0ke (2010-03-10)

lmao yeah its just writing

Crank392 (2010-05-12)

good guide yet no virus, yet to try it out but finger crossed, nice one pal