Nokia Flashing Tool - Phoenix Service Software 2010.38.005.44210

How To Use Phoenix Service Software To Update Your Nokia Phone With The Latest Firmware. Things to be kept in mind before installing Phoenix Service Software: 1. Do not connect your phone before installing Phoenix software. 2. Now ensure you have no antivirus software or any other software running on your pc or in the system tray while you are using Phoenix. You should turn them off while using Phoenix. Make sure your system hasnt got any hanging problem. 3. Turn off your screensaver. 4. Charge your phone battery to at least 50%. Although flashing takes only 8-9 minutes. Installing Phoenix Service Software 2010: If you have older version of Phoenix, no need to uninstall it. This latest version will automatically replace it. 1. Install the software. Be patient, it may take some minutes to install all the components. 4. Dont run Phoenix software now. 5. Connect your Nokia handset to your pc with USB cable in PC Suite mode. 6. Windows will start installing the connectivity drivers as soon as you connect the phone. Let it install completely. Installing Firmware Files From The Offline Package You Downloaded: 1. If your firmware file is in .rar format, first extract it using WinRar on desktop. 2. On desktop you will find .exe file of your firmware file. 3. Install the exe file. It will install it to default location of C:\Program files\Nokia\Phoenix\Products\ 4. Be sure you install updated firmware. You cannot downgrade your phones firmware in BB5 phones which includes all new Nokia phones including N-Series. 5. Phoenix allows downgrading but your phone doesnt allow it as your phone has some special security built into it. So no use of trying it. Youll get an error message. 6. You can reinstall your current firmware also if you have its package. It is supported. It can also sometimes solve little issues. I revived my "Dead Phone". 7.Scout the web for latest firmware for your specific phone. Flashing Procedure [Updating to latest firmware]: 1. Open Phoenix Service Software. 2. Connect your phone in PC Suite Mode. 3. In Phoenix, click File>Manage Connections. 4. Now click New. 5. Now select the type of cable you are using. If you are using DKE- 2, CA-53 [N-Series] cable, select USB. 6. Click Next. It will find your product and say FOUND. If it doesnt find any, you can try changing your cable type by clicking Back. 7. Click Next and then Finish. 8. Now your cable type [USB] appears in the connection list. Select it. Click APPLY and then CLOSE. 9. Now select File>Open Product. 10. A list of RM code will open. Select your phones RM code. Like RM-133 for Nokia N73. Click OK 11. Now select File>Scan Product. 12. Your phones firmware info will appear at the extreme bottom of the Phoenix window. 13. Now go to Flashing>Firmware Update. 14. A window will open. 15. On that window click Browse button [the one with three dots]. 16. A window will open with various products and various regions. Choose the region or country of your choice according to the language pack you want to install. 17. Click Ok. 18. Click Refurbish. 19. Now your actual flashing has started. Dont touch your phone or press any button until the flashing has finished. Also dont touch your data cable and your computer system. 20. At the end Phoenix will tell you to remove your phone as the flashing has finished. 21. Now wait for your phone to reboot into latest firmware. 22. The flashing procedure takes 8-9 minutes, a lot faster than Nokia Software Updater. Flashing dead phones [Which show only white screen on startup] Note: You can install any firmware in dead phones whether it is latest and or the old one. 1. The procedure is the same for flashing Dead phones. 2. Start Phoenix. Connect your phone with USB Cable [phone is off at this time]. 3. Click File>Open Product. Select your RM code from the window that appears. Click OK. 4. Click File> Manage Connections. Select No Connection. Then APPLY and CLOSE. 5. Now straight away click Flashing>Firmware Update. 6. A window will open. Click on Browse button [the one with 3 dots]. 7. A window will open with various products and various regions. Choose the region or country of your choice according to the language pack you want to install. 8. Check the option “Dead Phone USB Flashing. 9. Click Refurbish. 10. Flashing has started. 11. After some seconds flashing will pause asking you to turn your phone ON. 12. Press POWER button of your phone until backlight comes up. 13. Flashing will proceed. 14. Your phone will automatically start when the flashing finishes. After finish you can safely remove your data cable from handset. Important Note: If you want to install another update to your phone after a new firmware is released, first remove the previous version you installed in C:\Program files\Nokia\Phoenix\Products\ Just delete all the contents of Products folder before installing a new firmware. Enjoy! *dotSIS* *[zaeb]*

udp://tracker.openbittorrent.com:80
udp://open.demonii.com:1337
udp://tracker.coppersurfer.tk:6969
udp://exodus.desync.com:6969

 thethingy (2010-12-21)

step number 1 is not needed in this version, it works just fine with pc suite installed and the cable drivers installed, NSS works just fine with this installed also.

Free-Sharing (2010-12-21)

thnks for sharing that out. much appreciated :)

rogamosh (2010-12-22)

Great Upload Dude...U saved my nokia 3500.....
Here u r guyz....All Framewares r here
http://www.mygsmforum.com/f147/
Best Of Luck....

jonext (2011-03-11)

thanks a lot! thanks for the source...

mwaxx (2011-05-04)

will flashing the handset allow me to unlock it (the sim card i mean) because the muppet i bought it off screwed the restriction code up more than 5 times and now its knackered

securiboy (2011-06-11)

If U have to turn off antivirus it's a shitty program (virus)! Never turn of antivitus!!!!

zVIERA (2011-09-22)

is this FW tool debranding phones as well?

muzzthegreat (2011-12-29)

NO GOOD : it installs fine.
Then on First Run is says “please wait while Windows configures Phoenix service software” and the pop up demands “Phoenix service software.msi” in some Temp Folder. [\LOCALS~1\Temp\is-HBVTK.tmp\]
I have checked – there is no such file on my system [plenty of other MSIs but not this one].
And there is No such Temp folder under Local settings\Temp\
Hangs at that point, Never Completes configuring, never completes the First Run.

hasser2012 (2012-10-01)

how to use it?
plz help me............

alinasir (2013-06-28)

all fake

Joe.Tauch (2014-04-06)

The newest and final version of Phoenix Service Software is on: